Autoscale
Autoscale enables the vertical scale to be set automatically, which can make it easier
to keep the live signal(s) visible in the plot. Sometimes, when a measurement doesn't appear as
expected, setting Autoscale to Auto can solve the problem. When autoscale is off, the vertical
scale of the plot can be manually adjusted by a two-finger pinch gesture within the axis label
region of the plot.
Time Scale
Here, the horizontal time scale of the oscilloscope plot can be manually adjusted by selecting
the desired value. The horiztonal scale can also be manually adjusted by a two-finger pinch
gesture within the horizontal axis label region of the plot.
Cursor Options
Horizontal Bar
When working with multiple channels in the oscilloscope tool, this option lets you choose which
channel the horizontal cursor bar will be associated with.
Peak Track
The cursor may be configured to automatically move to the frequency of the peak value
within the current waveform plot. This option allows the peak track function to be disabled,
or to track the maximum or minimum peak within the waveform.
Peak Track Channel
When working with multiple channels in the FFT analyzer, this option lets you choose which
channel the peak track function will apply to (the channel whose spectral peak will be tracked
by the cursor).