Question about SLM capability
I'm interested in buying SignalScope Pro for iPhone, but I'd like to check about its capability as a sound level meter before purchasing.
The website indicates that the fractional-octave-band analyzer mode includes measurement of frequency-weighted time-averaged sound level (eg L_Aeq) and maximum and peak levels, but I couldn't see where these are displayed and controlled on the example screenshot. Could you show a screenshot of these facilities, please?
Does the app indicate C-weighted peak sound level?
What are the minimum and maximum frequencies for the 'flat' frequency weighting? Does it cover 10 Hz to 20 kHz as in the IEC 61672-1 specification for frequency weighting Z?
My personal preference would be to buy your SoundMeter app and then use in-app purchasing to upgrade later to SignalScope Pro. Is that possible, or planned?
Thanks in advance,
Peter
The website indicates that the fractional-octave-band analyzer mode includes measurement of frequency-weighted time-averaged sound level (eg L_Aeq) and maximum and peak levels, but I couldn't see where these are displayed and controlled on the example screenshot. Could you show a screenshot of these facilities, please?
Does the app indicate C-weighted peak sound level?
What are the minimum and maximum frequencies for the 'flat' frequency weighting? Does it cover 10 Hz to 20 kHz as in the IEC 61672-1 specification for frequency weighting Z?
My personal preference would be to buy your SoundMeter app and then use in-app purchasing to upgrade later to SignalScope Pro. Is that possible, or planned?
Thanks in advance,
Peter
0
Comments
It does for each octave or 1/3-octave band.
It depends on the hardware used. For some line-input accessories connected to the iPhone's dock connector, you should be able to utilize the full 10 Hz to 20 kHz range, within the Class 1 tolerances specified in IEC 61672-1. However, current iPhone and iPod touch devices roll off low frequencies for built-in microphone and headset input signals. You may be interested in taking a look at the frequency response plots on the blog:
iPhone Dock and Headset IO Frequency Response
iPhone Line Input Frequency Response Comparison
iPhone Microphone Frequency Response Comparison
I suspect that, over time, you may see a gradual convergence of our iPhone apps, so that functionality in one may be employed in another, via in-app purchase. However, this convergence will remain somewhat limited. For example, I expect that SoundMeter will remain focused on sound. SignalScope Pro, on the other hand, is geared toward measurements of electronics and vibration, in addition to sound.
Ben
Thanks for your clear and informative response. On that basis, I'm going to go ahead and purchase SoundMeter.
I would have purchased SignalScope Pro (which looks very powerful) if it had overall C-weighted peak sound level, instead of just in fractional-octave bands. Hope you might find that a potential feature for a future version of SignalScope Pro.
Peter